The Allsky1pi camera system is slowing coming back to normal. It stopped working a few weeks back, from a suspected overheating of the camera and the raspberry pi. The housing was cut open and an open mesh was installed at the bottom to allow for better airflow.
Configuration files were also changed and changed back and changed again.
Last nights run was reasonably successful, back up to 60 second exposures with no moon up, one image every 60 seconds, and the sensor temperature not wildly obscene.

Still to come are more and better dark frames and to figure out some way to automate dark frame processing into the system, based on the sensor temperature.
That should really clean up the hot pixels.